Decorative gel color for design, with sand particles, without dispersion layer, with embossed texture.

Ideal for surface painting and 3D models, it does not require TOP COAT sealing as it has built-in TOP COAT.

Apply with a linear or oval brush in medium layers until the desired height is achieved.

Do not apply too thick layers because they do not polymerize inside.

During polymerization, this gel has a slight degree of self-leveling, so the built relief flattens a little.

Very high viscosity ✔️

High degree of pigmentation ✔️

NO dispersion layer ✔️

Polymerization 60-120 sec. LED/UV ✔️

Quantity 5g ✔️

TO BE USED WITH GLOVES ✔️

Important!

The product can cause allergies if it comes into contact with the skin.

Storage conditions: with the lid tightly closed, at temperatures between 15-25 degrees, away from natural light.

The product picture is taken in studio light. Actual color may differ depending on the light in your room (warm, cool, neutral).

VERY IMPORTANT – ABOUT THE PACKAGING!
After removing the protective film from under the cover, the cover will close without a “fix point”. This means that closing the lid must be forced a little from the moment you feel that it “doesn’t close anymore”, if you turn the lid with a little more force, only then it will close completely.